Product Categories
- Thin rubber sheet liner extrusion calendaring product line
- Pin-barrel cold feed triplex Extruder
- The hydraulic vulcanizing machine
- Mechanical vulcanizing machine
- 45 ° / 88 ° / 90 ° / fiber cord automatic cut Lap Cutter production line
- Double composite extrusion production line
- Hexagon bead winding machine double station
- Apex laminating production line
- Extrusion Line Steel Belt Production Line
- 87 ° -90 ° fiber cord cutting machine production line
- Semi steel production line
- Three-station spraying machine
- Quintuplex Extruders Production Line
- Fabric multi-ply slitting machine
- Multi-station Cap ply vertical slitter
- One-stage semi-steel radial tire building machine
- All steel production line
- Four composite tread extruding line
- Bead flipping machine
- Fixed Tel：86-0773-2565454
86-0773-5850339 - Fax ：86-0773-5850339
- Mobile：13263730523 Mr.Dong
15807735736 Mr.Li
18176427865 Mr.Li - Email：GM.Dong@alpha06.com
mike.li@alpha06.com
liv.wong@alpha06.com - Company address：90# Villa，Yingtelai Garden，Seven star District，Guilin City，Guangxi Province，P.R. of China. ( Trade Department)
Rubber Production Line
Home >Products>Rubber Production Line
Product introduction: ZPF-B radial tire spraying machine is a kind of equipment used for radial spraying in tire,It can be automatically set, automatically clamping the tire bead, spraying at the designated place,then tires are rotated to the exit and the tires are automatically released. The tires are fed into the output table by the tire contactor. The spray speed is 6-7 tires per minute.
Application:
1. Product introduction:
ZPF-B radial tire spraying machine is a kind of equipment used for radial spraying in tire,It can be automatically set, automatically clamping the tire bead, spraying at the designated place,then tires are rotated to the exit and the tires are automatically released. The tires are fed into the output table by the tire contactor. The spray speed is 6-7 tires per minute.
2. The main components
1. Into the tire raceway, centering positioning device and lifting device
2. Machine frame
3. Three-position grasping device and rotation positioning device (overrunning clutch)
4. Blower lifting mechanism
5. Export roller
6. Storage device
7. Catch claw cleaning device
8. Electrical control system
9. Pneumatic control system and the liquid injection piping system
3. Technical features
Item
Parameter
Diameter of bead
12″-20″
Max. height among beads
550mm
O.D of tires
φ950mm
Max. weight of
40kg
Spraying speed per minute
6-7 tires
All electrical equipment and wiring are in line with B2d factory explosion-proof rating requirements.
Outline dimension of host
8100×4700×3300
Height of tire inlet and outlet
1020
Motor power of tire inlet and outlet roller bed
0.75KW 1440rpm
Power
three phase 380V 50HZ
Power air source
0.7Mpa
Internal spraying liquid pressure
0.21Mpa-0.35Mpa
embryo tire
4. Operation process
Spraying machine operating procedures are:Tires from the power roller conveyor to the receiving station at the use of fixed-center institutions and photoelectric control system,so that the tire is positioned automatically after the maintenance of the device in the raceway on the tire will be lifted and clamped, the gripper open, so that the tire gripping, the whereabouts of the riser, the tires hanging up,at this time the equipment rotation system, the tire rotation to the spray station, the spray down the bell and high-speed rotation,after spraying, and then turn the tires to export to the raceway out, and then repeat a cycle.
