Product Categories
- Thin rubber sheet liner extrusion calendaring product line
- Pin-barrel cold feed triplex Extruder
- The hydraulic vulcanizing machine
- Mechanical vulcanizing machine
- 45 ° / 88 ° / 90 ° / fiber cord automatic cut Lap Cutter production line
- Double composite extrusion production line
- Hexagon bead winding machine double station
- Apex laminating production line
- Extrusion Line Steel Belt Production Line
- 87 ° -90 ° fiber cord cutting machine production line
- Semi steel production line
- Three-station spraying machine
- Quintuplex Extruders Production Line
- Fabric multi-ply slitting machine
- Multi-station Cap ply vertical slitter
- One-stage semi-steel radial tire building machine
- All steel production line
- Four composite tread extruding line
- Bead flipping machine
- Fixed Tel：86-0773-2565454
86-0773-5850339 - Fax ：86-0773-5850339
- Mobile：13263730523 Mr.Dong
15807735736 Mr.Li
18176427865 Mr.Li - Email：GM.Dong@alpha06.com
mike.li@alpha06.com
liv.wong@alpha06.com - Company address：90# Villa，Yingtelai Garden，Seven star District，Guilin City，Guangxi Province，P.R. of China. ( Trade Department)
Rubber Production Line
Home >Products>Rubber Production Line
Product introduction: Laminated the extruded apex on the bead ring. The apex with triangular cross-section extruded from the extruder die plate and laminated with the well winded bead ring though the closed cooling device(Dual cooling of cooling roll and air conditioner cooling).
Application:
Horizontal apex laminating machine
1. structure
It is composed of XJD90 X 12D cold feeding extruder, apex take-off device, apex cooling traction device, constant tension storage device, the laminating main machine, the finished product storage frame, electrical control system, pneumatic control system and safety protection system.
2.Technological parameter
|
Items |
Parameter |
|
Section configuration of bead ring |
Rectangle or hexagon |
|
Diameter range of bead ring |
12”—18” |
|
High range of apex |
20-65mm |
|
Compound eccentricity of bead ring and apex |
≤1mm |
|
Joint angle |
80°~ 90° |
|
Compound height deviation of bead ring and apex |
≤2mm |
|
Splicing range |
≤2mm |
|
Equipment production speed |
≥1800 / class |
